Metz 60CT-1 Manual/Auto Thyristor Flash | $442.95 | |  |
The Metz mecablitz 60CT-1 is a slightly
simpler version of the Metz mecablitz 60CT-4,
although it comes with an impressive array of features:
The same light output to meet the requirements
of the professional photographer and a wide
range of acc
essories.
Features- Guide number The guide number provides information on the light output of the flash unit.
- Manual Manual mode for full light output at the specified guide number.
- Tilt-and-swivel reflector Can be swiveled horizontally and/or tilted vertically by the specified angle for bounce flash photography.
- Flash-ready indication Indicates whether the flash capacitor is fully charged.
- Clip-on wide-angle diffuser A clip-on wide-angle attachment for 35mm exposures (24 x 36 mm) with lenses of 28 mm focal length and longer.
- Power source This symbol specifies the type of power source that can be used for the given flash unit.
- Winder mode Allows to shoot a sequence of pictures at a rate of 2 or 3 frames/sec.
- Motor drive Permits a series of pictures to be shot in fast sequence - up to 5 frames per second.
- Correct-exposure signal Lights up to indicate that the frame was correctly exposed.
- T/I An energy saving thyristor circuit that cuts off the flash after the frame has been correctly exposed, and stores the remaining power for the next flash.
- Telecomputer The telecomputer measures the light reflected from the subject and automatically cuts off the flash as soon as sufficient light has been emitted for correct exposure.
|
|
