novatron NOVATRON N2103-FC 1500 W-S FLASH HEAD | $288.99 | | |
Novatron flash heads demonstrate the most efficient flash emission available in the industry. Each head is subjected to 100% quality checks at each step of fabrication and assembly. The fully assembled heads are, again, 100% tested under load for a minimum of 100 firings as a final inspection. Novatron flash tubes are color corrected to a color temperature of 5500° Kelvin (daylight). Novatron flash heads come in two categories, un-switched and switched. To avoid damage, switched heads must not be used in the stop-down mode without at least one other head set to full power. Damage of this nature voids the warranty. The brackets used in heavy duty applications such as large soft boxes may benefit by the use of the optional 4049 locking heavy duty handle kit which replaces the tilt knob with a 3-1/2" handle.
The new 2103-FC is a 3-way switching convertible flash head that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. It comes equipped with an internal fan, which aids in cooling the electronics and the USER REPLACEABLE plug-in flash tube. Fan cooling extends the power handling capacity of this head to 1500 watt-seconds. It is also shipped with a 250-watt halogen modeling lamp and a 25-foot power cord. This flash head comes with the N2032 (6 1/2") removable reflector and the new N4040 heavy duty mounting bracket.
Features- Item Description
- Novatron flash heads demonstrate the most efficient flash emission available in the industry. Each head is subjected to 100% quality checks at each step of fabrication and assembly. The fully assembled heads are, again, 100% tested under load for a minimum of 100 firings as a final inspection. Novatron flash tubes are color corrected to a color temperature of 5500° Kelvin (daylight). Novatron flash heads come in two categories, un-switched and switched. To avoid damage, switched heads must not be used in the stop-down mode without at least one other head set to full power. Damage of this nature voids the warranty. The brackets used in heavy duty applications such as large soft boxes may benefit by the use of the optional 4049 locking heavy duty handle kit which replaces the tilt knob with a 3-1/2" handle.
- The new 2103-FC is a 3-way switching convertible flash head that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. It comes equipped with an internal fan, which aids in cooling the electronics and the USER REPLACEABLE plug-in flash tube. Fan cooling extends the power handling capacity of this head to 1500 watt-seconds. It is also shipped with a 250-watt halogen modeling lamp and a 25-foot power cord. This flash head comes with the N2032 (6 1/2") removable reflector and the new N4040 heavy duty mounting bracket.
- Specifications
- Maximum Watt/Seconds
- 1500/1000
- User Replaceable Flashtube
- Yes (F0008)
- Changeable Reflector
- Yes
- Circuit Protection
- No
- Cable Length
- 25' (11.3 m)
- Modeling Light Wattage
- 250W, 120V
- Modeling Light On/Off Switch
- Yes
- Protective Glass Dome
- Yes
- Fan Cooled
- Yes - Fan Off decreases head power limit to 1000 w/s
- Dimensions
- 4 x 7" (10.1 x 17.8 cm) without reflector
- Weight
- 3.2 lb (1.5 kg)
- Item Includes
- 1500 W/S Flashtube
- 6-1/2" Reflector, 70 Degrees - Novatron Bare Tube Head
- 250W/120V Modeling Lamp
- Head Extension Cable - 25'
- N4040 Heavy Duty Mounting Bracket
- Flashtube protector sleeve
|
|