novatron NOVATRON N2140-C 1000 W-S FLASH HEAD | $188.99 | |  |
Novatron flash heads demonstrate the most efficient flash emission available in the industry. Each head is subjected to 100% quality checks at each step of fabrication and assembly. The fully assembled heads are, again, 100% tested under load for a minimum of 100 firings as a final inspection. Novatron flash tubes are color corrected to a color temperature of 5500° Kelvin (daylight). Novatron flash heads come in two categories, un-switched and switched. To avoid damage, switched heads must not be used in the stop-down mode without at least one other head set to full power. Damage of this nature voids the warranty. All standard line heads including 2140-C, 2120-C, 2110-C, 2105-C, and 2100-C, come factory equipped with a 6-1/2" fixed high efficiency parabolic reflector and factory replaceable flash tube. All Novatron standard line flash heads are configured with our 4045, 5/8" adapting mounting brackets. The brackets used in heavy duty applications such as large soft boxes may benefit by the use of the optional 4049 locking heavy duty handle kit which replaces the tilt knob with a 3-1/2" handle.
The 2140-C is a 3-way switching flash head that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. This flash head cannot be switched fully off. It's equipped with a 100 watt modeling lamp, a 25-foot power cord, and a 4045 mounting bracket.
Features- Item Description
- Novatron flash heads demonstrate the most efficient flash emission available in the industry. Each head is subjected to 100% quality checks at each step of fabrication and assembly. The fully assembled heads are, again, 100% tested under load for a minimum of 100 firings as a final inspection. Novatron flash tubes are color corrected to a color temperature of 5500° Kelvin (daylight). Novatron flash heads come in two categories, un-switched and switched. To avoid damage, switched heads must not be used in the stop-down mode without at least one other head set to full power. Damage of this nature voids the warranty. All standard line heads including 2140-C, 2120-C, 2110-C, 2105-C, and 2100-C, come factory equipped with a 6-1/2" fixed high efficiency parabolic reflector and factory replaceable flash tube. All Novatron standard line flash heads are configured with our 4045, 5/8" adapting mounting brackets. The brackets used in heavy duty applications such as large soft boxes may benefit by the use of the optional 4049 locking heavy duty handle kit which replaces the tilt knob with a 3-1/2" handle.
- The 2140-C is a 3-way switching flash head that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. This flash head cannot be switched fully off. It's equipped with a 100 watt modeling lamp, a 25-foot power cord, and a 4045 mounting bracket.
- Specifications
- Maximum Watt/Seconds
- 1000 w/s *
- User Replaceable Flashtube
- No **
- Changeable Reflector
- No
- Circuit Protection
- No
- Cable Length
- 25'
- Modeling Light Wattage
- 100W, 120V
- Modeling Light On/Off Switch
- Yes
- Protective Glass Dome
- No
- Fan Cooled
- No
- Dimensions
- 5 x 7" (12.7 x 17.8 cm) with built-on reflector
- Weight
- 2.2 lbs (1 kg)
- Note: Damage will result if you use this head by itself with the D1500 Power Supply @ full power.
- This action would also void the warranty.
- Item Includes
- 1000 w/s UV coated built-in Flashtube
- 100 W screw-in Tungsten Modeling Light
- 25' head cable
- Built-in reflector
|
|
